| |
|
Tungsten
carbide tipped reciprocating saw blades
|
 |
This
blade is specially designed to cut AAC. Not only does it incorporate
tungsten carbide teeth to prevent dulling, but the way that the
teeth are applied is special as well. Years of research and experience
have resulted in optimal tooth spacing, pitch, and design. These
blades will outlast many dozens of conventional blades. The 2"
height of the blade makes it rigid so that there is less warping
within the wall than with conventional blades. These blades are
so tough they can even cut through hard blocks such as bricks and
CMU's. |
| |
| |
| Pricing: |
12"x2"x22 teeth blade
17 3/4"x2"x35 teeth blade |
$29.99
$34.99
|
| |
|
Carbide super-spade
drill bit
|
|
AC4
|
AC2 |
 |
 |
|
These
series of interchangeable drilling components are made extremely
tough.
The AC4 have tungsten carbide teeth, with a pilot bit to keep
them centered in the hole. They are available with a 3”
or 4” head and with either hex or SDS shank. They are long
enough to drill through a 12” block. There is also a box
cutter for opening the 4” round hole into a square 2 gang
box outlet.
The AC2 drill bit will only work in the lightweight fly-ash blocks.
They are available with an 18" extension that enables it
to drill through a 24" tall jumbo block.
|
| Pricing: |
|
|
| AC2 - 3 7/8 "
drill bit |
$49.99
|
|
| AC2 - 18" extension |
$19.99
|
|
| ------------------------------------------------------------------ |
-------------
|
|
| AC4
- 3” x 13” drill kit (choice of adapters) |
$179.99
|
|
| AC4
- 4” x 13” drill kit (choice of adapters) |
$219.99
|
|
| AC4
- 3” replacement cutting head |
$99.99 |
|
| AC4
- 4” replacement cutting head |
$129.99 |
|
| AC4
- 9" extension shaft |
$49.99
|
|
| AC4
- hex adapter |
$44.99
|
|
| AC4
- SDS adapter |
$49.99
|
|
| AC4
- SDS double gang box cutter |
$149.99
|
|
| |
|
AAC cut-off
saw blades
|
 |
|
| This
awesome saw blade is coated with diamonds and is strong enough to
cut through steel reinforced AAC panels. It has extra wide tooth
spacing to assist in excavating the cut material. It will fit on
any standard 14” cut-off saw. We recommend using a water assisted
saw to keep dust down. |
| Pricing: |
|
|
| Diamond
Tooth |
$249.99
|
| Composite |
$19.99
|
| |
|
AAC Diamond
core drill bit
|
 |
Using
a core drill along with one of these core drill bits is both the
fastest and easiest way to core AAC blocks on the jobsite. Since
the bit only has to make a perimeter cut there is much less material
to be removed than if grinding out the entire hole. The bit has
diamond teeth which are strong enough to cut through steel reinforcing
in lintels and panels. The teeth will last indefinitely in soft
AAC.
The standard size is 3 ½”. They are available in
various diameters and lengths. We have bits in stock that will
core a 24” block.
|
| Pricing: |
|
3 1/2" x 14"
|
$124.99
|
|
3 1/2 " x 24"
|
$249.99
|
Carbide Tooth
Bandsaw Blades
|
|
|
These
blades have carbide teeth and are designed specifically for use
with AAC. The blade speed has been matched with the tooth spacing
and pitch over decades of research to provide you with optimal performance.
We stock blades for the Lissmac MBS-502, MBS-502/650, MBS-755, MBS-756
and MBS-602 saws. We can custom order any size blade for you as
well. We occasionally have used blades available as well. Used blades
are cheap backups. |
|
|
Pricing: |
|
 |
MBS-502 x 1/2"
MBS-502 x 1"
MBS-502/650 x 1/2"
MBS-502/650 x 1"
MBS-602 x 1/2"
MBS-602 x 1"
MBS-755/756 x 1/2"
MBS-755/756 x 1"
|
$164.99
$174.99
$184.99
$194.99
$189.99
$199.99
$219.99
$229.99
|
| |
|
|
